A while back, I was asked to write about the different types of shields. I’d already set up the posts for July to promote The Life & Times of Ichabod Brooks, so here we are in August. This takes a lot more research than normal for me because I typically only used three types: Buckler, Large Round (Targe) , and Tower. So, I’m just going to list all the types and be informative:
- Buckler– These are small shields that are about 18 inches in diameter. This doesn’t help much against projectiles, so it’s more useful in close combat. Even then, it won’t protect much against large weapons, so one could see it more as an offensive weapon that you can punch with. Supposedly, the Buckler is partially responsible for the term ‘Swashbuckler’ because it was used to give some defense while depending more on offense.
- Targe– Also called a Target, this is a concave shield that is round and are what you probably think of first. They tend to be iron or wood or a combination, but they are big enough to protect the main body and head. Not at the same time though. Not really sure why it’s a rectangle up there since all the pictures I found were circular. Anyway, this is what would be one of the three standard shield types and shapes.
- Roundel– Also called a Rondache, the second type is a bigger circle made of boards of light wood and rope. Then it was covered with leather or metal plates.
- Heater– This is the other common fantasy shield style with a pointed bottom and a straight top. It actually developed from the Kite Shield, which you can tell by comparing them. The Heater was made from leather over wood and, like the Targe, became used more often in jousting than combat. One thing to note is that this shield doesn’t protect the legs. Also, it’s the shape you tend to see with Heraldic Shields.
- Kite– Just a quick note that this one was made for mounted cavalry. The narrow bottom protected the right leg and the rounded top protected the shoulder and torso. These were eventually phased out by large shields with flat tops and the more manageable Heater.
- Pavise– These are shields that cover the whole body and are placed on the ground to protect archers. There were smaller versions for close combat and for soldiers to wear on their backs as defense. Many times you’ll see these called Tower Shields, but they aren’t exactly the same. Tower Shields might be the inspiration since they were one of two shields used in Greece. Every time I ran into the phrase it was in quotes too, so this might just be a vague term.
- Scutum– These were adopted by the Romans and slowly evolved into a large rectangle that would be used in a phalanx. These are the ones you would see get held up as a shield wall. One thing that I read is that they would have a circular shield as an auxiliary called a Clipeus. The Scutum depended on maintaining a formation, so a break of ranks meant that this large shield lost its full usefulness. Eventually, it stopped getting used and was replaced by oval and round shields.
- Nguni/African– This was a hard one to find info on because it has a bunch of names. Also, I kept finding sites that sold ‘Zulu Shields’ instead of giving any information on them. These are made from raw cattle hide and there are different styles, each one with their own use and name. They were the only pieces of armor and used primarily to deflect spears and arrows. You could also use them to land a stunning blow or knock an enemy off-balance. African Shields also had uses in dance and protection from the elements. Due to it not being as sturdy as the metal and wood ones, its use went into decline due to firearms.
- Celtic– These were usually oval, but could be hexagon or round. They usually had a hollow Shield Boss, which is a round piece attached to the middle front of the shield. Celts had battle shields that were designed to be light and strong, but they could break and were seen as expendable. Some clans also had wooden shields that were used in ceremonies instead of combat.
- Ballistic– This is the modern shield that you see used by SWAT teams. Designed to stop bullets and allow the person behind to see ahead, it’s an interesting design. Almost like it combines the Pavise and Targe since you can protect your body while shooting. Not a perfect combination, but it’s kind of there. This also proves that shields still have a use in the modern age.
Probably forgot other shields like the Coffin, Figure-of-Eight, Wankel, etc. One problem I had is that the information wasn’t always clear and many of the styles overlapped with other cultures. So some shields have multiple names and slight differences of style and use among them, but not enough to get a full entry. The key point is protecting the arms and torso though. That’s the area that they guard more because you have a helmet for your head and the legs were harder to hit than the main body. As for the arms, those were needed to continue fighting. One could still swing a sword with injured legs.
Anyway, feel free to add some shield info in the comments.
Interesting breakdown.Then there are the kind on the USS Enterprise. There are a lot of variations. I like the big round one with a cutout on one side. It was for a spear to protrude forward, and they were used as shield walls too.
LikeLike
Yup. Didn’t think of counting the future ones since the request was for the medieval types. Always been more of a buckler fan, but the spear one is really cool. Need to remember that one for future use.
LikeLiked by 1 person
I was just teasing about the science fiction ones. I got the gist of the post, but I do like those round ones. I can’t remember the name now, but the Romans even had a special spear designed to weigh down a shield and render it useless. The first one was supposed to make it impossible to hold in place, the next one was to kill the guy behind it.
LikeLike
I want to say that was the Roman Pilum. Good for throwing and stabbing. Don’t remember it being known for weighing down a shield.
LikeLiked by 1 person
I wish I could remember the name. The idea was a heavy shaft that would force the shieldman to reveal himself. The poor guy might hold it up for ten minutes or so, but eventually it would get the best of him.
LikeLike
Sounds like an odd weapon. Do you push the spear down on the shield?
LikeLiked by 1 person
Just throw it as far as I knew. I’ll see if I can find something.
LikeLike
Check out the Roman pilum. That’s the one they’re best known for. Stuck running around through areas with shoddy Wifi today. Sorry about that.
LikeLiked by 1 person
I think that’s the one. Best I could find on my lunch break:
Thanks in part to experimental archaeology, it is generally believed that the pilum’s design evolved to be armour-piercing: the pyramidal head would punch a small hole through an enemy shield allowing the thin shank to pass through and penetrate a distance sufficient to wound the man behind it. The thick wooden shaft provided the weight behind the punch.
Further complications and injury could ensue if the understandably-reluctant enemy did not discard his precious shield quickly enough, as there would be a great press from the men behind him.
LikeLike
Sounds right. Guess spears like that aren’t seen as graceful, so fiction uses swords and flexible Asian spears instead.
LikeLiked by 1 person
Could be an opportunity there to change things up. According to last week’s television, dragons are particularly effective against, well everything.
LikeLike
Depends on the writer and dragon mythology being used. If it’s the ones I’m thinking of then they’re basically living, borderline psychotic super weapons. For some reason, people always throw spears at a dragon’s mouth instead of the eye or wings.
LikeLiked by 1 person
I prefer Sir Robin’s approach. Running away seems like a good idea.
LikeLike
Where’d you get the coconuts?
LikeLike
They were left over from when we ate my bards.
LikeLike
Tastes just like pork.
LikeLiked by 1 person
That style, with the cutout, is the Greek Hoplite Shield. =)
LikeLiked by 1 person
Thanks.
LikeLike
Thank you.
LikeLike
Fantastic amount of work Charles.. have shared and put in the blogger this evening.. Very interesting..
LikeLike
Thanks. Glad you enjoyed it enough to share. 😁
LikeLiked by 1 person
Fascinating Charles.. x
LikeLike
Pingback: Smorgasbord Daily Blogger – Monday 14th August, 2017 – Karen Ingalls, Nicholas Rossis, Charles Yallowitz, The Story Reading Ape with Jemima Pett | Smorgasbord – Variety is the spice of life
Thank you for sharing this information, Charles. I have printed it out for my son, he is crazy about swords and shields.
LikeLike
Awesome. Swords are Wednesday, I believe.
LikeLike
Very interesting, Charles.
LikeLike
Thanks. 😁
LikeLiked by 1 person
Reblogged this on Author Don Massenzio.
LikeLike
Thanks for the reblog
LikeLiked by 1 person
You’re welcome.
LikeLike
Another great, helpful post. Thank you!
LikeLike
You’re welcome. 😁
LikeLiked by 1 person
Pingback: A Brief Guide To A Fantasy Arsenal | Nicholas C. Rossis
If I ever need a shield in my writing I know where to look now! Thanks for the informative post. 🙂
LikeLike
You’re welcome. Happy to help. 😁
LikeLiked by 1 person